Get An Extra 10% Off when the item is back in stock!
Our humblest apologies that this item is not in stock. We swear on the grave of our favorite recently departed chew toy, that we will make it up to you! If you'd like to be notified when this item becomes available, enter your information below and click "Notify Me".
How To Measure Your Dog's Paws!
Proper footwear fit is essential to a fun day out (or in). Here's how to measure your pet's paws...
With your pet's paw on the ground, measure from the tip of the claws (those have to fit inside the shoe too) to the back of where the paw touches the ground, which is just behind the pad.
While your pet's paw is still on the ground, measure from side to side at the widest point of your pet's paw, which is usually near the base of the toes.
Handy Tip: Try having your pet step on a piece of paper, then trace around the paw. Then, while your pet is off eating your houseplants or terrorizing the neighborhood, you can measure the traced outline in peace.
How To Measure Your Dog!
I have worked with the finest furry tailors in the world, and am here to share my bounty of knowledge. Here's how to measure your pet...
Measure from the base of the tail (where it connects to the hindquarters) up to where the collar typically sits at the base of the neck, then follow up with a generous back scratch.
This is measured by giving your pet a
hug, during which you measure the entire circumference (all the way around) at the widest point of your pet's chest. This is typically right behind the front legs.
First, plenty of kisses. Then, measure the neck's circumference
(the distance around it) at the point where the collar sits.
Important Sizing Note: The given measurements are the dimensions of the actual product, not of the pet they fit. After measuring your pet, make sure all measurements fit within the following dimensions (with a little room to spare in the chest and neck).
Give your ears a break and protect engraving with the Bone Pet Tag Silencer for our engravable pet I.D. tags!
Glows in the Dark
Fits bone shape quick tags
Why We Love It:
The Bone Pet Tag Silencer will cut back the noise of rubbing and clicking pet tags when pets are prowling around at night. This handy accessory stretches around our engravable bone tags (choose small or large) and provides a protective barrier against scratches and contact noise.
Not only will this accessory keep your pet's tag noise in check, it's equally important in the way it protects the engraving on the tag. This will help your pet's name and contact information to stay legible in case your pet should get lost. The stretchy tag frame also glows in the dark for an extra safety measure.
This tag silencer is made of soft, safe and durable PVC and provides a custom fit for our bone-shaped tags we can engrave for you here at BaxterBoo.com (sold separately.) Other shapes are available as well.
Important Sizing Note: The following measurements are the dimensions of the actual product, not of the pet they fit. After measuring your pet, make sure all measurements fit within the following dimensions (with a little room to spare in the chest and neck).
Posted On 07/17/17 by Elizabeth W from Robertsdale ,
Its great I would like it better if it were made in the USA
boom boom out goes the lights
Posted On 05/08/17 by Samantha D from Cleburne, TX
Yes, Samantha D recommends this product!
No hiding in a dark corner or on the floor and worried I'd step on the puppy. works well for me to know where Pandora is at.
Posted On 03/24/17 by Tara from ,
Yes, Tara recommends this product!
This fit perfectly over the bone shaped tag I have. It keeps the jingle jangle to a minimum.
Too early to tell
Posted On 12/14/16 by Debbie P from , CO
Yes, Debbie P recommends this product!
Purchased this item for two reasons...first to quiet our little guy as he walks around & second to keep his name tag in quality shape longer. Doesn't seem to quiet his movement much & it's too early to tell about keeping the tag in great shape. I do like the way it makes his name tag look.
Posted On 12/08/16 by Gerri from ,
Yes, Gerri recommends this product!
The key is to measure the tag you have before ordering. Having said that, the tag silencer fit perfectly around the bone shaped tag. No more clinky jingling!!
Posted On 12/01/16 by Eylül from ,
Yes, Eylül recommends this product!
It really does work.
Posted On 08/23/16 by yvette m from , TX
Yes, yvette m recommends this product!
this silencer worked great for the small bone ID for my puppy, along with his rabies tag there is no more noise when he's running around
Posted On 03/28/16 by criise from Irving, TX
Yes, criise recommends this product!
I got this to go with the tag I ordered. I didn't want my dog to jingle when he walked. It works great!
Brenda's Testimonal (Via Email)
Absolutely love BaxterBoo!! I can order for the very small Chi to the very large Terrier and still get the same quality, on time arrival and pricing for both sizes. The vast array of selections and variety in every department puts BaxterBoo way ahead of any competitors. Love this company.